11Specifications and reference

Specifications#

Performance#

Purity after drying

99.999%

Dew point

≤ -65 °C (atmospheric)

Maximum flow

2.5 Nm³/h (5 × HXB-V1)

Operating pressure

10 barg standard · up to 35 barg on request

Regeneration H2 loss

approx. 90 NL/h, regardless of unit count

Physical#

Form factor

19-inch rack mount · 6U

Size W × D × H

482 × 650 × 266 mm

Utility and safety#

Adsorbent

Sealed · no replacement required

Regeneration method

Twin-tower alternating · heater purge

Power supply

200-240 V AC · single phase · 50/60 Hz

Power connection

IEC C14 inlet

Power consumption

approx. 300 W max

Regeneration cycle

Factory 12 h · heating 6 h · 1–48 h adjustable

Regeneration temperature

150 °C default · 50–200 °C adjustable

Safety functions

Relief valve · overheat trip · liquid leak sensor · software emergency stop

Interfaces#

H2 inlet / outlet

1/4-inch tube bulkhead

Required inlet pressure

min. 10 barg

Communication

Modbus TCP · MQTT/JSON

Firmware update

Wi-Fi OTA

Dew point sensor

Option

• Dew point is at atmospheric pressure, equivalent to about 5 ppm water. Power consumption is the maximum during regeneration heating.

Outline dimensions#

• Front 482 × 266 mm (6U). Rack slots at 465 mm centres.
• Depth 650 mm max. (613 mm front panel to rear, fittings 30.7 mm, handles 36.5 mm).