COMPONENTS & BOP

From water treatment to compression and storage,
supplied to your operating conditions.

Getting hydrogen out at the pressure and purity you need takes more than a stack. Electrolyte circulation, instrumentation and safety, and drying sit in between. We supply them to the specifications we established building our own systems.

Pick a product to see the range it covers and the parts that go around it.

What is different from buying direct

Every item on this page can be bought from the manufacturer directly. Buy direct and these three are yours to handle.

You get the whole set

Buying direct

Buying an electrolyser does not mean hydrogen comes out of it. A stack on its own does nothing. It needs a unit that cleans the feed water, a pump that circulates the electrolyte, an instrument that checks the gas coming out, and a dryer that takes the moisture off. Quotations from different suppliers cover different parts of that, so they are hard to compare.

Through us

Tell us what you are running and we will put together the configuration you need. If your lab already has the instruments, we leave those out and fill in the rest.

You buy only what you need

Buying direct

It is easy to pick a power supply sized for a whole stack when you are running a single cell, because in a catalogue the larger one looks like the safer choice. Water is the same. If the site uses a few litres a day, a unit that treats hundreds of litres an hour costs several times more and only adds things to maintain.

Through us

We check the products you have chosen against the conditions we run. We will review quotations you have received elsewhere as well. If a specification is more than you need, we say so first.

You know what has been verified

Buying direct

Catalogue performance is measured under conditions the manufacturer sets. A small difference in temperature or electrolyte and the same figure does not come back. What those conditions were, and whether anything else was tried, is often not written down.

Through us

For conditions we have run ourselves, we answer with measured data. For conditions we have not run, we say plainly that they are unverified, offer the item as a candidate only, and confirm it together with you.

Warranty and lead time differ by item. Both are on the part pages.

Manufacturers we source from

We are not a single-brand distributor. Below are the manufacturers we have handled directly in building our own stacks and systems, together with those we have taken quotations from and evaluated against a specification.

For some items we do not name the supplier. The specifications and what we verified are on the part page all the same.

Water treatment
BWT ELGA / Veolia Human Thermo
AEM membrane
Sino-Tech Versogen
Ionomer
Versogen
Hydrogen drying and purification
Donaldson Omega Air ON2Quest
Instrumentation and safety
Alicat Scientific Bronkhorst Chang AI GASDNA Honeywell INFICON Messkonzept Michell Instruments MSA Safety New Cosmos Electric PRIGNITZ Mikrosystemtechnik Southland Sensing STORK Instruments YAMAMOTO KEIKI
Compression and storage
Haskel Maximator REJOOL Shandong Terek

Tell us the operating conditions and we will come back with a quote

The same item changes with size, operating conditions and certification requirements. If the configuration is not settled, we start there.

Request a quote