Downloads
Chapters
01Safety and handlingDamage inspection, protecting the catalyst, controlling offcuts, making up KOH electrolyte and PPE, and checking before assembly.Read →02Receiving and storageThe state it arrives in, what to check on the day, and how to handle and store it.Read →03Formats and orderingWhich of the three standard formats to choose, the conditions behind the published figures, what we make to order, what to put in an order, and lead times.Read →04Cell assembly overviewFrom received electrodes to a test cell and its first measurement, the most common failure (gaskets), and what you do not need to do.Read →05Checking performance and reading dataWhich condition each datasheet figure belongs to, half-cell against cell values, and what to match before comparing your own measurement with the datasheet.Read →
Specifications at a glance
MaterialNiFe LDH · Ni foam
Porosity95–98%
Surface area (BET)25× vs Ni foam
Standard size200 × 300 mm
The figures above are for the anode (HXP-an). The cathode is on the HXP-ca product page.
Documents
Electrode operation noteCell assembly and clamping, operating conditions, the measurement sequence, and what to checkResource libraryEvery datasheet, the catalogue and the company profile in one placeProduct pageFull specification table, photographs and application examplesFAQQuestions and answers from real technical reviewsHXP-ca product pageThe full cathode specification table and the catalyst options