Pt/C
HER cathode catalyst option
Who it is for
A cathode with a choice of Pt/C or PtRu/C for your test conditions
HXP-ca is an HER cathode with a Pt/C or PtRu/C catalyst layer on carbon paper. Review the published specifications first, then select the option based on the membrane and operating conditions.
Choose this product when
- Research evaluating a low-PGM-loading AEM water electrolysis cathode
- Development comparing or selecting Pt/C and PtRu/C for the target operating condition
- Applying a carbon-paper cathode in an MEA or test cell
CATALYST SELECTION
Pt/C or PtRu/C on one carbon-paper format
Choose Pt/C or PtRu/C for the operating condition, then review the common supply specification. The catalyst layer is coated onto the carbon-paper gas diffusion layer, so HXP-ca is a catalyst-coated substrate (CCS), also called a gas diffusion electrode, rather than a catalyst-coated membrane (CCM).
PtRu/C
HER cathode catalyst option
Carbon-paper electrode
260 ± 20 µm · standard 200 × 300 mm
Included supply scope
- Carbon paper cathodes coated with a Pt/C or PtRu/C catalyst
- 0.2 mgPGM/cm² catalyst loading · PtRu based on total Pt+Ru PGM mass · 260 ± 20 µm thickness
- Standard 200 × 300 mm; other sizes and quantities made to order, with recommended operating conditions
Customer preparation
- Cell hardware and membrane (our HXS-0 cell can be used)
- An evaluation protocol (current density, electrolyte concentration, temperature, test duration)
- Target thickness, size and quantity if a custom specification is needed
Test results
Single-cell energy consumption with the Pt/C cathode
The label on each chart says whether it is measured, test or design-target data. Test conditions are in each chart caption.
TEST DATA01
Shows cell energy consumption across current density for a single cell using the Pt/C cathode.
Cell energy use · single cell with Pt/C cathode (0.2 mgPGM/cm²)
Customers
HXP-ca in customer projects
These records describe the selection purpose and application context, not customer-verified performance.
Specifications
HXP-ca specifications and supply terms
The specification table, support terms and review documents.
Complete product specifications13 items
| Material | Pt/C·PtRu/C + binder (catalyst layer) · carbon paper (GDL) |
|---|---|
| Catalyst loading | 0.2 mgPGM/cm² (XRF) · PtRu based on total Pt+Ru PGM mass |
| Thickness | 260 ± 20 μm |
| Area density | 105 ± 10 g/m² |
| Test condition | 0.3 M KOH · room temperature (3-electrode) |
| Standard format | 200 × 300 mm · total thickness 260 ± 20 µm |
| Custom | Custom size and thickness available (L ≤ 300 mm · W ≤ 200 mm) |
| Minimum order | One sheet · no minimum order value |
| Lead time | Standard 2 weeks · custom up to 2 months |
| Options | Pt/C · PtRu/C |
| Tafel slope | PtRu/C 45.7 · Pt/C 52.2 mV/dec (three-electrode) |
| Catalyst layer | Low surface roughness (minimises membrane damage) |
| Accelerated stress (AST) | 10,000 cycles completed (1.0 ↔ 0.05 A/cm² · 5 s) |
How to cite in a paper1 item
Use the line below in the Methods section when reporting the material source.
Pt/C (or PtRu/C) on carbon paper (HXP-ca, HydroXpand Inc., Republic of Korea)- Specification
- Pt/C or PtRu/C catalyst layer on carbon paper GDL, 260 ± 20 µm total thickness
- Test condition
- 0.3 M KOH, room temperature, three-electrode
Ask [email protected] if the lot number is required.
Support, lead time and commercial terms3 items
Replacement & technical support
Cathode replacements to the same specification can be ordered directly from us. We sign an NDA where detailed performance data or test results need to be exchanged.
Lead time & status
Available · 2 weeks from PO acceptance for standard formats (custom up to 2 months)
Commercial terms & origin
EXW basis; DAP and other terms by agreement. Country of origin is the Republic of Korea, with certificate of origin provided.
Pricing depends on quantity and Incoterms, so it is issued as a quotation. Before asking for one, compare five years of buying cylinders against making the same hydrogen on site.
Cost vs cylinders calculator